Jump to content

Remove/Replace non-U3 CD Partition from USB drive


engineman

Recommended Posts

I recently received a USB drive at a career fair at school.  However, everytime I plug the thing in, internet explorer opens up the companies career page.  The drive appears to be using technology similar to U3 since there is an extra CD-ROM drive that appears on the computer and it contains all of the autorun stuff.  Could someone please point me in the right direction to removing this from my drive?

Link to comment
Share on other sites

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

I might be able to help you  depending on what brand your flash-drive is (or rather : the controller-chip)

If you post the VID/PID and other info about your drive I might be able to provide you links to the necessary tools .

You can get the information by downloading this nice tool from nirsoft :

http://www.nirsoft.net/utils/usb_devices_view.html

Link to comment
Share on other sites

Thanks for your help.

VID: 1976

PID: 6025

Here is the whole info as reported by USBDeview

[table]

[tr]

[td]Device Name[/td]

[td]Description[/td]

[td]Device Type[/td]

[td]VID[/td]

[td]PID[/td]

[td]USB Class[/td]

[td]USB SubClass[/td]

[td]USB Protocol[/td]

[/tr]

[tr]

[td]Flash Disk[/td]

[td]USB Flash Disk USB Device[/td]

[td]Mass Storage[/td]

[td]1976[/td]

[td]6025[/td]

[td]08[/td]

[td]06[/td]

[td]50[/td]

[/tr][/table]

Link to comment
Share on other sites

Hmm, VID 1976 doesn't appear in any of the vendor-lists but

PID 6025 appears to be this controller : CBM2080 Flash drive controller http://www.chipsbank.com/en/product/xx/cbm2080.htm

according to THIS post  http://www.911cd.net/forums//index.php?sho...st&p=116954 the tool to

reprogram it should be available somewhere, unfortunately the download-link is dead .

But since the manufacturer probably has changed at least the VID the best way to make sure is to disassemble the drive (carefully)

and read the markings on the controller-chip .

------Tools like this are not meant for "normal" users. I have a machine setup ONLY for such tasks as installing them may or may not

mess with your standard usb-drivers . ABSOLUTELY NO GUARANTEES - USE THIS AT YOUR OWN RISK - and RTFM first !!! ----

EDIT : I found a collection of production-tools for USB-devices on a Chinese geek-board and uploaded the CBM2080 tool

and the English manual here : http://www.wikiupload.com/download_page.php?id=35427

NOTE :  Some AV's don't like the file, this could be because of the Chinese characters OR it could actually be infected

so use at your own risk : http://www.virustotal.com/analisis/0bb166e...241f6493a177819

I will upload the entire collection later . 

 

Link to comment
Share on other sites

Thanks for all of your help. I opened the drive up and the chip appears to be a CBM1190. Do you have any tools that will work with this chip?

UPDATE:

I tried both the CBM2080 tool and the FlashDiskManager program in the links that you sent me.  Neither seems to recognize the drive.  Also based on the manual with the CBM2080 program, you need to have a special programming board in order to use the program.

Link to comment
Share on other sites

I found your other post with a collection of production tools.  I used the CBM2090 tool (according to CBM's website the 2090 is pin identical to the 1190), and it let me reformat the drive and now the extra CD drive is gone.  I also think that with a little bit of fiddling it would let me put a custom autorun ISO on the drive so I could make a switchblade drive if I wanted to.  Very cool!  Thanks for your help.

Link to comment
Share on other sites

I recently received a USB drive at a career fair at school.  However, everytime I plug the thing in, internet explorer opens up the companies career page.  The drive appears to be using technology similar to U3 since there is an extra CD-ROM drive that appears on the computer and it contains all of the autorun stuff.  Could someone please point me in the right direction to removing this from my drive?

use the u3 removal tool

Link to comment
Share on other sites

  • 2 months later...

I have a similar issue to this. The key sets up an auto run 'CD' with a presentation on it. Very annoying.

I've got the tools form this topic but can't get them to work.

The VID is 0204, PID shows as 6025 but the chip is ID'd as CMB2091

I've tried the CMB2080 and CMB2090 tools but neither seem to work. CMB2090 crashes when run on my XP box.

Any ideas what tool I need to remove the presentation?

Link to comment
Share on other sites

  • 2 months later...

I've a similar problem. I checked the info about my usb pen drive with usbview:

serial number: 000878

VID: 2008

PID: 2018

USB class: 08

USB subclass: 06

USB protocol: 50

I think the controller is MW6208 and I need UdTools 1.0.2.9.

The problem is these tools seem to be available only at a chinese site http://bbs.mydigit.cn/read.php?tid=4345, only members can download and to register you need an invitation code :(

I really want to get rid of this "automount cdrom" on my pen drive, can anyone provide me with the tools or an invition code?

Thanks in advance ;)

Link to comment
Share on other sites

Hey, i've got an similar problem with my usb pen and also want to get rid of this "extra" CD Drive.

usbview gave me this informations:

Device Name Mass Storage

Description USB USB 2.0 Flash USB Device

Device Type Mass Storage

VendorID 058f

ProductID 6387

USB Class 08

USB SubClass 06

USB Protocol 50

I could not figure out the controller chip. Hopefully you could help me out with some tools or tell me how to solve this.

Thanks in advance

Link to comment
Share on other sites

Based on the VID/PID it sounds like a Transcend-drive ?

They use Alcor-controllers in a lot of their drives, production-tools for Alcor

can be found here : http://translate.google.com/translate?hl=e...%3Fname%3DFiles

A good tool to identify your UFD's controller can be downloaded here :

http://www.mydigit.cn/mytool/chipgenius.rar

If a mfg-tool is available for your UFD it will even show a link to the tool.

Unfortunately the files are on a Chinese board that requires registration and "points" to download

but all the files are also available on the Russian board :)

Edit : If it IS a Transcend you might find something useful here as well :

http://www.transcendusa.com/Support/DLCenter/

Link to comment
Share on other sites

I need help too. the controller chip is iocell 2515pro.

# lsusb

Bus 001 Device 025: ID 067b:2517 Prolific Technology, Inc. Flash Disk Mass Storage Device

Bus 001 Device 024: ID 067b:2517 Prolific Technology, Inc. Flash Disk Mass Storage Device

Bus 001 Device 023: ID 067b:2515 Prolific Technology, Inc. Flash Disk Embedded Hub

Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...